Everyone knows that tank trucks are dangerous goods vehicles. Due to their particularity, the country strictly controls the safety of tank trucks. Therefore, everyone will be very cautious when transporting and operating the vehicle, and strictly follow the dangerous goods operation system. If the operation is improper, it will cause a lot of trouble and cause unnecessary losses. So what are the safety regulations for tank trucks?
1. When using and refueling tank trucks, a dedicated person must be assigned to operate and be responsible, and the vehicle is not allowed to be used without permission.
2. The fueler must be specially trained, have a certain fire-fighting knowledge, have a strong sense of responsibility, and have a good professional ethics. Conscientiously implement the "three inspections a day" system to keep the cars clean and in good condition.
3. Before refueling, in addition to regular inspections as required, check the connections, valves, high-pressure protection valves, oil pipelines, fueling guns and other parts of the oil storage tank to confirm that all parts are normal and effective before starting use. .
4. Special storage carports should be set up for tank trucks, and the carports should be kept away from fire sources, and clear fire prohibition signs and fire extinguishing equipment should be set up.
5. When a vehicle is driving on the road, keep a safe speed, avoid other vehicles, choose a driving route, and try to avoid construction sites with open flames. When transporting oil in the rainy season, keep away from electrical equipment that is prone to sparks such as high-voltage lines and transformers.
6. During the refueling operation or the oil pump discharge process, no open flame is allowed to approach within 10 meters, smoking and electronic communication are prohibited.
7. During the operation of the tanker truck, once a diesel oil leak occurs, the leaking part should be checked immediately and emergency treatment should be carried out. At the same time, clean up the leaked diesel to avoid the open flame approaching fire. After an emergency occurs, the diesel fuel tanker should be inspected as a whole, and normal operations can be carried out after eliminating hidden dangers.
8. Do a good job of safety protection in special seasons. Sun protection measures should be taken in summer, and high-pressure valves and safety valves should be checked frequently to ensure effective use. In winter, when oil pipelines and valves are solidified or frozen, it is forbidden to use an open flame to bake and thaw.
9. After the tanker has been refueled, the ground must be disconnected after the fuel has stabilized for 5 minutes. After the oil is installed, the oil will flow in the tank, causing the oil surface potential to remain for a few minutes. In addition, check the valves and connections of all parts to avoid running, emitting, dripping, and leaking. The fuel dispenser must be locked and safety precautions must be taken.
1. Clean up the lubrication system of the engine when your tanker is traveling 5,000 to 10,000 kilometers. When the tanker is too noisy or has weak acceleration, it needs maintenance.
2. When the gearbox of the tanker truck changes gears slowly or the vehicle travel distance reaches 20,000 kilometers, you must pay attention to it and do some maintenance. If you find that the hydraulic system is leaking, you must clean up in time.
3. The power steering system, cooling system, and braking system of the tank truck also need to be replaced and overhauled within a specific mileage. Only in this way can the vehicle maintain good performance.
The above is the introduction to the safety regulations of refined oil trucks. Through reading, we have learned that tank truck fuelers must undergo special training. They should perform routine inspections before refueling, confirm that all parts are normal and effective, and set fire prohibition signs, and be safe after refueling Take precautions, avoid other vehicles during driving, and clean up if oil leaks are found.
In addition, the tank truck should be maintained regularly in daily work, the lubrication system should be cleaned in time, and various parts should be replaced and repaired. Both operators and ordinary citizens have an obligation to understand the relevant safety regulations. Because this is related to the personal and property safety of each of us, I hope you will pay attention to it.
What are the specifications for the use of sprinkler trucks?
Oil tank truck loading and unloading instructions
What are the precautions for the use of concrete mixer trucks2022-11-02 14:18
Cause Analysis and Repair Scheme of Welding Seam Cracking in Concrete Mixer Truck Raceway2022-10-12 15:11
What are the advantages of chemical liquid trucks?2022-09-28 16:32
What are the functions of the fluidization device installed on the cement bulk carrier?2022-09-14 10:54
Address:Zhangheng Street corner Guanlin Road, Science and Technology Park, Luolong District, Luoyang City, Henan Province