In an industry where lighter weight is becoming more eye-catching, lighter and stronger materials have become the key to breakthroughs. After carefully selected by Linyu's R & D team, an aluminum-magnesium alloy was used as the material to develop an aluminum alloy cement bulk carrier that subverted the traditional carbon steel material and became the industry's new favorite. Today let us take a look at its "excellent".
1. Lightweight and soft. The density of aluminum is 2171g / cm3, which is about one-third of the density of steel; Young's modulus is also about one-third of that of steel.
2. High intensity ratio. The tensile strength of pure aluminum is one fifth of that of low carbon steel. However, after heat treatment strengthening and alloying strengthening, its strength will increase significantly.
3. Good corrosion resistance. One of the characteristics of aluminum alloys is that when exposed to air, a dense oxide film is formed on the surface. This film can prevent corrosion, so it has good corrosion resistance. If the "alumina film treatment method" is implemented again, corrosion can be completely prevented.
4. Good processing performance. The extrusion performance of the rail vehicle profile is good, and the secondary machining and bending are also easier.
5. Easy to regenerate. Aluminum has a low melting point (660 ℃) and is easy to regenerate. There is no pollution when it is disposed of, which is conducive to environmental protection and conforms to the sustainable development strategy.
Continue to use high quality aluminum materials of magnesium aluminum series, excellent processing performance, high strength and safe use; new optimized design for tank structure, short tank length and large fluidization angle, reducing fluidized dead angle, higher fluidized bed flow The chemical efficiency gives the product more efficient use performance, lower residue and faster discharge.
Aluminum alloy pipeline system, the pipeline is more coordinated, and the air intake is smoother; equipped with a lower-mounted 5 inch discharge pipe, the discharge resistance is smaller, and at the same time, the wear resistance of the pipe is strengthened, the discharge rate is high, and the residual ash rate Lower, modular piping, easy maintenance and repair.
The use of high-strength L-shaped aluminum profiles has a new design concept and a good frame structure, which improves the tensile and torsional performance of the frame.
(1) 35 square aluminum alloy cement bulk carrier semi-trailer, the wheelbase of the whole vehicle is shorter, which can meet the 12-meter weighbridge on the whole vehicle composed of natural gas tractor, the length is short, and the vehicle is more flexible.
(2) Aluminum alloy anti-skid walkway, aluminum alloy wheel cover, aluminum alloy ladder, high user-friendliness, light weight, more convenient and safe to use.
(3) Aluminum alloy tank lid, 8T lightweight legs, 10T lightweight axle, three leaf springs, light suspension, aluminum alloy forged rims, 12R22.5 tires and other high-end lightweight configurations, the vehicle weight is as low as 4.9 Under tons.
(4) Air suspension can be selected, the vehicle runs more stable.
In summary, this is the introduction of aluminum alloy cement bulk carrier. The car is lighter in weight and stronger in quality. The whole car is basically "fully armed" under the aluminum alloy package!
What are the advantages of CIMC tank trucks?
What should be paid special attention to during the use of the mixer?
Address:Zhangheng Street corner Guanlin Road, Science and Technology Park, Luolong District, Luoyang City, Henan Province
E-mail:inquiry@lingyu.com
Phone:0086-379-65937678
